Sign In | Join Free | My himfr.com
Home > Integrated Circuit Chip >

FM33256B-G Integrated Circuit Chip 3V Integrated Processor Companion with F-RAM

Anterwell Technology Ltd.
Contact Now
    Buy cheap FM33256B-G Integrated Circuit Chip 3V Integrated Processor Companion with F-RAM from wholesalers
     
    Buy cheap FM33256B-G Integrated Circuit Chip 3V Integrated Processor Companion with F-RAM from wholesalers
    • Buy cheap FM33256B-G Integrated Circuit Chip 3V Integrated Processor Companion with F-RAM from wholesalers

    FM33256B-G Integrated Circuit Chip 3V Integrated Processor Companion with F-RAM

    Ask Lasest Price
    Brand Name : Anterwell
    Model Number : FM33256B-G
    Certification : new & original
    Price : Negotiate
    Payment Terms : T/T, Western Union, MoneyGram Paypal
    Supply Ability : 3000pcs/week
    • Product Details
    • Company Profile

    FM33256B-G Integrated Circuit Chip 3V Integrated Processor Companion with F-RAM

    FM33256B-G Integrated Processor Companion with F-RAM

    Features

    High Integration Device Replaces Multiple Parts

    Serial Nonvolatile Memory

    Real-time Clock (RTC) with Alarm

    Low VDD Detection Drives Reset

    Watchdog Window Timer

    Early Power-Fail Warning/NMI

    16-bit Nonvolatile Event Counter

    Serial Number with Write-lock for Security


    Ferroelectric Nonvolatile RAM

    256Kb F-RAM

    High Endurance 100 Trillion (1014) Read/Writes

    38 year Data Retention (+75°C)

    NoDelay™ Writes


    Real-time Clock/Calendar

    Backup Current at 2V, 1.15 µA (max.) at +25C

    Seconds through Centuries in BCD format

    Tracks Leap Years through 2099

    Uses Standard 32.768 kHz Crystal

    Software Calibration

    Supports Battery or Capacitor Backup


    Processor Companion

    Active-low Reset Output for VDD and Watchdog

    Programmable Low-VDD Reset Thresholds

    Manual Reset Filtered and Debounced

    Programmable Watchdog Window Timer

    Nonvolatile Event Counter Tracks System Intrusions or other Events

    Comparator for Power-Fail Interrupt or Other Use

    64-bit Programmable Serial Number with Lock


    Fast SPI Interface

    Up to 16 MHz Maximum Bus Frequency

    RTC, Supervisor Controlled via SPI Interface

    SPI Mode 0 & 3 (CPOL, CPHA=0,0 & 1,1) Easy to Use Configuration

    Operates from 2.7 to 3.6V

    Small Footprint “Green” 14-pin SOIC (-G)

    Low Operating Current

    -40°C to +85°C Operation

    Underwriters Laboratory (UL) Recognized


    Description

    The FM33256B device integrates F-RAM memory with the most commonly needed functions for processor-based systems. Major features include nonvolatile memory, real-time clock, low-VDD reset, watchdog timer, nonvolatile event counter, lockable 64-bit serial number area, and general purpose comparator that can be used for a power-fail (NMI) interrupt or other purpose. The device operate from 2.7 to 3.6V. The FM33256B provides 256Kb memory capacity of nonvolatile F-RAM. Fast write speed and unlimited endurance allow the memory to serve as extra RAM or conventional nonvolatile storage. This memory is truly nonvolatile rather than battery backed. The real-time clock (RTC) provides time and date information in BCD format. It can be permanently powered from external backup voltage source, either a battery or a capacitor. The timekeeper uses a common external 32.768 kHz crystal and provides a calibration mode that allows software adjustment of timekeeping accuracy. The processor companion includes commonly needed CPU support functions. Supervisory functions include a reset output signal controlled by either a low VDD condition or a watchdog timeout. /RST goes active when VDD drops below a programmable threshold and remains active for 100 ms (max.) after VDD rises above the trip point. A programmable watchdog timer runs from 60 ms to 1.8 seconds. The timer may also be programmed for a delayed start, which functions as a window timer. The watchdog timer is optional, but if enabled it will assert the reset signal for 100 ms if not restarted by the host within the time window. A flag-bit indicates the source of the reset. A comparator on PFI compares an external input pin to the onboard 1.5V reference. This is useful for generating a power-fail interrupt (NMI) but can be used for any purpose. The family also includes a programmable 64-bit serial number that can be locked making it unalterable. Additionally it offers an event counter that tracks the number of rising or falling edges detected on a dedicated input pin. The counter can be programmed to be non-volatile under VDD power or battery-backed using only VBAK. If VBAK is connected to a battery or capacitor, then events will be counted even in the absence of VDD.



    Pin NameType PPin Description
    /CSInputChip Select: This active low input activates the device. When high, the device enters lowpower standby mode, ignores the SCK and SI inputs, and the SO output is tri-stated. When low, the device internally activates the SCK signal. A falling edge on /CS must occur prior to every op-code.
    SCKInputSerial Clock: All I/O activity is synchronized to the serial clock. Inputs are latched on the rising edge and outputs occur on the falling edge. Since the device is static, the clock frequency may be any value between 0 and 16 MHz and may be interrupted at any time.
    SIInputSerial Input: All data is input to the device on this pin. The pin is sampled on the rising edge of SCK and is ignored at other times. It should always be driven to a valid logic level to meet IDD specifications. The SI pin may be connected to SO for a single pin data interface.
    SOOutputSerial Output: This is the data output pin. It is driven during a read and remains tri-stated at all other times. Data transitions are driven on the falling edge of the serial clock. The SO pin may be connected to SI for a single pin data interface
    CNTInputEvent Counter Input: This input increments the counter when an edge is detected on this pin. The polarity is programmable and the counter value is nonvolatile or battery-backed, depending on the mode. This pin should be tied to ground if unused.
    ACSOutputAlarm/Calibration/SquareWave: This is an open-drain output that requires an external pullup resistor. In normal operation, this pin acts as the active-low alarm output. In Calibration mode, a 512 Hz square-wave is driven out. In SquareWave mode, the user may select a frequency of 1, 512, 4096, or 32768 Hz to be used as a continuous output. The SquareWave mode is entered by clearing the AL/SW and CAL bits in register 18h
    X1, X2I/O32.768 kHz crystal connection (see Crystal Type section for suggestions). See AN407 app. note for details on how to connect external oscillator.
    /RSTI/OReset: This active-low output is open drain with weak pull-up. It is also an input when used as a manual reset. This pin should be left floating if unused.
    PFIInputEarly Power-fail Input: Typically connected to an unregulated power supply to detect an early power failure. This pin must be tied to ground if unused
    PFOOutputEarly Power-fail Output: This pin is the early power-fail output and is typically used to drive a microcontroller NMI pin. PFO drives low when the PFI voltage is <1.5V.
    VBAKSupplyBackup supply voltage: A 3V battery or a large value capacitor. If no backup supply is used, this pin should be tied to VSS and the VBC bit should be cleared. The trickle charger is UL recognized and ensures no excessive current when using a lithium battery.
    VDDSupplySupply Voltage
    VSSSupplyGround

    Stock Offer (Hot Sell)


    Part NumberQtymfgD/CPackage
    LM22676TJE-ADJ6794TI13+TO-263
    LM22777TJ-ADJ5048NS16+TO-263
    LM239APT4458ST13+TSSOP-14
    LM25011MY/NOPB3243TI16+MSOP-10
    LM25037MTX4474TI09+TSSOP-16
    LM25119PSQ/NOPB1820TI15+WQFN-32
    LM25575MHX3711TI12+TSSOP-16
    LM25576MHX5141TI14+TSSOP-20
    LM2575D2T-3.3R4G18153ON11+TO-263
    LM2575HVT-5.013120NS15+TO-220
    LM2575SX-5.022261NS16+TO-263
    LM2576-5.0WU4267MICREL14+TO-263
    LM2576D2TR4-5G5273ON14+TO-263
    LM2576HVSX-ADJ6468TI15+TO-263
    LM2576HVT-ADJ21640NS16+TO-220
    LM2576SX-1.218871NSC13+TO263-5
    LM2577T-ADJ4542NS12+TO-220-5
    LM2586SX-ADJ2498NS07+TO-263-7
    LM2588T-5.03655TI15+TO-220-7
    LM258DR69000TI16+SOP-8
    LM258DT70000ST13+SOP-8
    LM2594HVM-5.03314NS13+SOP-8
    LM2596HVT-ADJ21711NS14+TO-220
    LM2622MM-ADJ2888NSC08+MSOP-8
    LM2651MTCX-ADJ8710NS04+TSSOP
    LM2662MX5344TI16+SOP-8
    LM2663M6856NS16+SOP-8
    LM2675MX-5.05274TI16+SOP-8
    LM2675MX-ADJ5415TI15+SOP-8
    LM2734YMK12799TI16+SOT23-6
    LM2767M5X6927NSC16+SOT23-5
    LM2825N-ADJ1525NSC06+DIP-24
    LM2842YMK-ADJL4655TI16+SOT23-6
    LM285MX-1.25929NS16+SOP-8
    LM2901DR2G104000ON13+SOP
    LM2902DR2G77000ON15+SOP
    LM2903DR2G107000ON15+SOP
    LM2903IMX13191FSC11+SOP-8
    LM2904DR2G82000ON16+SOP-8
    LM2904MX11700NS15+SOP-8
    LM2904P20000TI16+TSSOP-8
    LM2904QPWRQ16065TI14+TSSOP-8
    LM2907N-88781NS97+DIP-8
    LM2917N-86580NS13+DIP-8
    LM2931AD-5.0R2G19723ON16+SOP-8
    LM2931CDR2G14829ON16+SOP-8
    LM2931CDR2G10000ON15+SOP-8
    LM2936MPX-3.39351TI14+SOT-223
    LM2936Z-5.03406NS05+TO-92
    LM2937ESX-3.39135NSC07+TO-263
    LM2937IMPX-3.31862TI16+SOT-223
    LM2940CSX-5.08095NS14+TO-263
    LM2940S-5.010367NS16+TO-263
    LM2940SX-5.08852NS15+TO-263
    LM3102MHX4578NS1540+TSSOP-20
    LM311DR58000TI13+SOP-8
    LM311DT60000ST16+SOP-8
    LM317AMDT52000NS13+TO-252
    LM317BTG13900ON11+TO-220
    LM317DCYR20007TI16+SOT-223
    LM317LD13TR17000ST16+SOP-8
    LM317LZ21782TI15+TO-92
    LM317MBSTT3G4644ON15+SOT-223
    LM317MDTRKG5965ON14+TO-252
    LM317MDT-TR59000ST15+TO-252
    LM317MDTX93000NS14+TO-252
    LM318P3377TI03+DIP-8
    LM321MFX6036TI10+SOT-23
    LM324ADR66000TI16+SOP-14
    LM324ADR2G11000ON14+SOP-14
    LM324DR55000TI16+SOP-14



    Quality FM33256B-G Integrated Circuit Chip 3V Integrated Processor Companion with F-RAM for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Anterwell Technology Ltd.
    *Subject:
    *Message:
    Characters Remaining: (0/3000)